Thank you for choosing Supreme Motorsports! General Aftercare and Warranty information can be found online at www.ceramicpro.com/aftercare

For best appearance, we recommend paint correction to remove scratches and imperfections prior to applying PPF. If paint correction is not requested, the vehicle owner acknowledges that any paint imperfections will not be removed prior to installation and may be visible below the PPF.

Vehicle owner acknowledges that any pre-existing coating or sealant can affect the adhesion of the PPF, and confirms that no such coating is present on the vehicle. Coatings or sealants may be polished away at an additional charge.

For best appearance, badges and decals will need to be removed. Badges will be reapplied over the PPF. There is a small possibility that badge and decal removal can damage paint, vehicle owners acknowledge this risk and will not hold the shop liable for damage. 

PPF may be bulk/custom or plotter cut to fit your vehicle. Industry standard edges for PPF stop short of the edge of the panel, a small amount of unprotected paint will remain at the edge. There may be a small margin of unprotected paint around cutout areas such as sensors. Wrapped edges and/or bulk/custom cut PPF is available at an additional charge for a more seamless look. 

Headlights may have PPF installed at vehicle owners risk. Some headlights (Porsche, etc.) come with a plastic protective layer that may lift or become damaged/delaminate during PPF installation or removal. The vehicle owner acknowledges this risk and will not hold the shop liable for damage. 

PPF installation and removal ALWAYS runs the risk of paint lifting/delamination. We pledge to minimize these risks as much as possible, but in the event of paint lifting due to PPF installation or removal, the vehicle owner acknowledges this risk and will not hold the shop liable for damage. Please note that factory paint is less likely to lift, and repainted panels are more likely to lift.

Paint protection film is designed to protect the paint from rock chips, scratches, wash lines, stains and debris. However, Paint Protection Film (PPF) is not impregnable. PPF can still scratch, tear or scuff if an impact strong enough encounters the film. The warranty on PPF does not cover wear and tear / scratches.

PPF REMOVAL – If we are removing old PPF on your vehicle, there is a high likelihood that paint can lift, we use heat & steam to remove old film, however, if paint were to lift Supreme Motorsports will not be held liable to repaint the panel. The adhesive on old PPF can sometimes be very powerful and can cause/ repaint/ poorly painted paint to lift. This is unfortunately something we cannot control.

– PPF is a paint protection product and is applied to the car in the form of a film – we do our absolute best to provide our customers with an invisible installation, however, it is not possible to hide all seams/ edges of the film, therefore, it may be possible to see the edge of the film on certain panels or joints where the film meets. Supreme Motorsports will not be able to re-do a panel of PPF due to the customer not liking a seam/ joint. We are only able to do what the film will allow us to do.

– PPF is not designed to be a completely invisible and maintenance free product. PPF will need to be trimmed and cleaned along various edges of the film as time goes on. This is completely normal.

– PPF will wear over time and will stain if not frequently washed/ maintained as directed in the warranty.

– Supreme Motorsports will stand behind the installation and warranty the craftsmanship of the installation to a reasonable extent. It is on the customer to read and understand Ceramic Pro LLC/KAVACA specific manufacturer warranties.